Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2008 >> FX45 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (VK45DE) - DTC P0451 Through P1168 >> DTC P1140, P1145 IVT Control Position Sensor >> DTC Confirmation Procedure >> With Consult-III

With Consult-III

  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-III.
  3. Start engine and drive vehicle under the following conditions for at least 10 seconds.
    CONDITIONS REFERENCE

    ENG SPEED More than idle speed
    Selector lever P or N position
  4. Check 1st trip DTC.
  5. If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
scientia non olet · About Mike's Workshop Manuals