Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2008 >> FX35 AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - DTCS P0447 Through P1211 (VQ35DE) >> DTC P0452 EVAP Control System Pressure Sensor >> DTC Confirmation Procedure >> With Consult-III

With Consult-III

  1. Start engine and warm it up to normal operating temperature.
  2. Turn ignition switch OFF and wait at least 10 seconds.
  3. Turn ignition switch ON.
  4. Select "DATA MONITOR" mode with CONSULT-III.
  5. Make sure that "FUEL T/TMP SE" is more than 0°C (32°F).
  6. Check 1st trip DTC.
  7. Start engine and wait at least 20 seconds.

    If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE ".