Component Inspection (ICC Brake Hold Relay)

1. Turn ignition switch OFF.
2. Remove ICC brake hold relay.
3. Check the continuity between ICC brake hold relay terminals under the following conditions.
   CONTINUITY SPECIFICATIONS
   
   

   Terminals	Condition	Continuity
   3 and 5	12V direct current supply between terminals 1 and 2	Existed
   	No current supply	Not existed

   Fig 1: Checking ICC Brake Hold Relay

   Courtesy of NISSAN MOTOR CO., U.S.A.

Is the inspection result normal? 

YES: INSPECTION END

NO: Replace ICC brake hold relay