Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2008 >> EX35 Base, AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System >> Component Diagnosis >> DTC C1116: Stop Lamp Switch >> Component Inspection

Component Inspection

  1. CHECK STOP LAMP SWITCH 
    1. Turn the ignition switch OFF.
    2. Disconnect stop lamp switch connector.
    3. Check the continuity between stop lamp switch connector terminals.
    TERMINALS CONTINUITY REFERENCE

    Stop lamp switch Condition Continuity
    Terminal
    1 - 2 (With ICC models)
    3 - 4 (Without ICC models)    		 Release stop lamp switch
    (When brake pedal is depressed.)    		 Existed
    Push stop lamp switch
    (When brake pedal is released.)    		 Not existed

    Is the inspection result normal? 

    YES: INSPECTION END

    NO: Replace stop lamp switch. Refer to EXPLODED VIEW .

scientia non olet · About Mike's Workshop Manuals