Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2007 >> QX56 AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS P1225 To P2A03 >> DTC P1564 ICC Steering Switch >> Component Inspection >> ICC Steering Switch

ICC Steering Switch

  1. Disconnect combination switch (spiral cable) harness connector M102.
  2. Check continuity between combination switch terminals 1 and 2 with pushing each switch.
    TERMINALS CONTINUITY CHART

    Switch Condition Resistance [Ω]
    MAIN switch Pressed Approx. 0
    Released Approx. 5, 500
    CANCEL switch Pressed Approx. 310
    Released Approx. 5, 500
    RESUME/ACCELERATE switch Pressed Approx. 2, 600
    Released Approx. 5, 500
    SET/COAST switch Pressed Approx. 1, 400
    Released Approx. 5, 500
    DISTANCE switch Pressed Approx. 740
    Released Approx. 5, 500

    If NG, replace ICC steering switch.

    Fig 1: Checking Continuity Between Combination Switch (Spiral Cable) Terminals 14 And 15
    G04900665Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals