Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2007 >> M45 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS P1550 Through P2A03 (VK45DE) >> DTC P1572 ASCD Brake Switch >> Component Inspection >> ASCD Brake Switch

ASCD Brake Switch

  1. Turn ignition switch OFF.
  2. Disconnect ASCD brake switch harness connector.
  3. Check continuity between ASCD brake switch terminals 1 and 2 under the following conditions.
    CONTINUITY CONDITION REFERENCE

    Condition Continuity
    Brake pedal: Fully released Should exist
    Brake pedal: Slightly depressed Should not exist
  4. If NG, adjust ASCD brake switch installation, refer to "BRAKE PEDAL ", and perform step  3 again.
    Fig 1: Checking Continuity Between ASCD Brake Switch Terminals 1 And 2
    G04900677Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals