Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2007 >> M35 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Engine Control System - Introduction (VK45DE)) >> Basic Service Procedure >> Fuel Pressure Check >> Fuel Pressure Release >> Without CONSULT-II

Without CONSULT-II

WARNING: This page is about a different car, the 2007 Infiniti M45. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove fuel pump fuse (1) located in IPDM E/R (2).
  2. Start engine.
  3. After engine stalls, crank it 2 or 3 times to release all fuel pressure.
  4. Turn ignition switch OFF.
  5. Reinstall fuel pump fuse after servicing fuel system.
    Fig 1: Identifying Fuel Pump Fuse And IPDM E/R
    G05209458Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals