Check power Window Motor (Front Passenger Side) Circuit

1. Turn ignition switch ON.
2. Check voltage between power window sub-switch (front passenger side) connector and ground.
   VOLTAGE SPECIFICATION
   
   

   Terminal			Window condition	Voltage (V) (Approx.)
   (+)		(-)
   Power window subswitch (front passenger side) connector	Terminal
   D46	8	Ground	UP	Battery voltage
   			DOWN	0
   	9		UP	0
   			DOWN	Battery voltage

OK or NG 

OK: GO TO 2.

NG: Replace front power window sub-switch (front passenger side).

Fig 1: Checking Voltage Between Power Window Sub-Switch Connector And Ground

1. Turn ignition switch OFF.
2. Disconnect power window sub-switch (front passenger side) and power window motor (front passenger side) connector.
3. Check continuity between power window sub-switch (front passenger side) connector and power window motor (front passenger side) connector.
   CONTINUITY SPECIFICATION
   
   

   A		B		Continuity
   Power window sub-switch (front passenger side) connector	Terminal	Power window motor (front passenger side) connector	Terminal
   D46	8	D42	2	Yes
   	9		1

   Fig 2: Checking Continuity Between Power Window Sub-Switch Connector And Power Window Motor Connector

   

OK or NG 

OK: Replace power window motor (front passenger side).

NG: Repair or replace harness.