Nighttime Mode

WARNING: This page is about a different car, the 2007 Infiniti FX45 and 2007 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.

Unified meter control unit is transferred to nighttime mode, with ignition switch turned ON and position light request signal from BCM with CAN communication.
When nighttime mode, illumination control switch illumination turns ON by unified meter control unit. Each illumination is controlled by unified meter control unit.

Fig 1: Identifying Illumination Control Switch
Courtesy of NISSAN MOTOR CO., U.S.A.
Each illumination can be adjusted to 16 step by illumination control switch in nighttime mode.

NOTE: For further details of illumination circuit, refer to "ILLUMINATION ".