Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2007 >> G35 x >> Repair and Diagnosis >> External Pages >> Different car >> Section 121 (Body Control System) >> BCM (Body Control Module) >> Removal and Installation of BCM >> Removal

Removal and Installation of BCM: Removal

WARNING: This page is about a different car, the 2007 Infiniti FX45 and 2007 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the dash side finisher (LH). Refer to "BODY SIDE TRIM ".
  2. Disconnect BCM connector.
  3. Remove bracket mounting screws (3) to remove BCM and fuse block with bracket.
    Fig 1: Identifying Bracket Mounting Screws
    G05222603
  4. Raise the pawl of fuse block and remove bracket from fuse block to remove BCM.
Fig 2: Identifying Pawl And Fuse Block
G05222604
scientia non olet · About Mike's Workshop Manuals