DTC Detection Logic
NOTE:
- If DTC B2608 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to
, "DTC LOGIC ".
- If DTC B2608 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to
, "DTC LOGIC ".
DTC DETECTION LOGIC CHART
| DTC No. |
Trouble diagnosis name |
DTC detecting condition |
Possible cause |
| B2608 |
STARTER RELAY |
BCM receives starter relay ON signal (CAN) from IPDM E/R even if BCM turns the starter relay OFF |
- Harness or connectors (starter relay circuit is open or shorted.)
- IPDM E/R
|