Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2007 >> G35 Base, 2D Coupe, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 56 (Engine Control System - Component Testing (Sedan)) >> On-Vehicle Maintenance >> EVAP Leak Check >> Inspection >> Notes

EVAP Leak Check: Inspection: Notes

WARNING: This page is about a different variant/trim than selected.
CAUTION:
  • Do not use compressed air or a high pressure pump.
  • Do not exceed 4.12 kPa (0.042 kg/cm2 , 0.6 psi) of pressure in EVAP system.
NOTE:
  • Do not start engine.
  • Improper installation of EVAP service port adapter to the EVAP service port may cause a leak.
scientia non olet · About Mike's Workshop Manuals