Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2007 >> G35 Base, 2D Coupe, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 29 (Power Control System (Sedan)) >> Power Distribution System >> On-Vehicle Repair >> BCM (Body Control Module) >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove instrument side finisher (RH). Refer to "REMOVAL AND INSTALLATION ".
  2. Remove dash side finisher (passenger side). Refer to "REMOVAL AND INSTALLATION ".
  3. Remove bolt and nut.
  4. Remove BCM and disconnect the connector.
scientia non olet · About Mike's Workshop Manuals