Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2007 >> G35 Base, 2D Coupe, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 29 (Power Control System (Sedan)) >> Power Distribution System >> Component Diagnosis >> B261A Push-Button Ignition Switch >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. PERFORM DTC CONFIRMATION PROCEDURE
    1. Press the push-button ignition switch under the following conditions, and wait for at least 1 second.
      • A/T selector lever is in the P or N position.
      • Release the brake pedal.
    2. Check "Self diagnostic result" with CONSULT-III.

    Is DTC detected? 

    YES: Go to , "DIAGNOSIS PROCEDURE ".

    NO: INSPECTION END

scientia non olet · About Mike's Workshop Manuals