DTC Detection Logic
WARNING: This page is about a different variant/trim than selected.
NOTE:
- If DTC B2611 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to
, "DTC LOGIC ".
- If DTC B2611 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to
, "DTC LOGIC ".
DTC DETECTION CHART
| DTC No. |
Trouble diagnosis name |
DTC detecting condition |
Possible cause |
| B2611 |
ACC RELAY |
BCM detects a difference of signal for 2 seconds or more between the following information.
- ACC relay ON/OFF operation
- ACC relay feedback.
|
- Harness or connectors (ACC relay feed back circuit is open or shorted)
|