Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2007 >> G35 Base, 2D Coupe, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 23 (Security Control System (Sedan)) >> Intelligent Key System >> Component Diagnosis >> Hood Switch >> Component Function Check

Component Function Check

WARNING: This page is about a different variant/trim than selected.
  1. CHECK FUNCTION
    1. Select "HOOD SW" in "Data Monitor" mode with CONSULT-III.
    2. Check the hood switch signal under the following condition.
      TERMINALS CONTINUITY REFERENCE

      Test item Condition Status
      HOOD SW Hood Open ON
      Close OFF

    Is the indication normal? 

    YES: INSPECTION END.

    NO: Go to , "DIAGNOSIS PROCEDURE ".

scientia non olet · About Mike's Workshop Manuals