Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2007 >> G35 Base, 2D Coupe, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 23 (Security Control System (Sedan)) >> Intelligent Key System >> Component Diagnosis >> DTC B210C: Starter Control Relay >> DTC Logic >> DTC Detection Logic

DTC Detection Logic

WARNING: This page is about a different variant/trim than selected.
NOTE:
  • If DTC B210C is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to XXX. , "DTC LOGIC ".
  • If DTC B210C is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to XXX. , "DTC LOGIC ".
DTC DETECTION LOGIC CHART

DTC No. Trouble diagnosis name DTC detecting condition Possible cause
B210C START CONT RLY OFF IPDM E/R detects that the relay is stuck at ON position even if the followings condition are met for about 1 second.
  • Starter control relay ON/OFF signal from BCM
  • Clutch interlock or shift park neutral position (PNP) switch input signal
  • IPDM E/R
scientia non olet · About Mike's Workshop Manuals