Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2007 >> FX35 AWD >> Repair and Diagnosis >> Transmission >> Automatic Transmission >> DTC P1815 Manual Mode Switch >> DTC Confirmation Procedure >> With Consult-II

With Consult-II

  1. Turn ignition switch ON.
  2. Select "ECU INPUT SIGNALS" in "DATA MONITOR" mode for "A/T" with CONSULT-II.
    3. Fig 1: Identifying CONSULT II - Screen Display - DATA MONITOR And ACTIVE TEST
    G04899604Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Start engine.
  4. Drive vehicle and maintain the following conditions for at least 2 consecutive seconds.

    MANU MODE SW: ON 

  5. If DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
scientia non olet · About Mike's Workshop Manuals