Terminals and Reference Value for Back Door Closure Control Unit

BACK DOOR CLOSURE CONTROL UNIT VOLTAGE SPECIFICATION

Terminal	Wire color	Item	Signal Input/output	Condition	Voltage (V) (Approx.)
1	R	Power source (Fuse)	Input	-	Battery voltage
2	PU	Closure motor (open) signal	Output	Fully close → fully open	Courtesy of NISSAN MOTOR CO., U.S.A.
3	G	Closure motor (close) signal	Output	Fully open → fully close	Courtesy of NISSAN MOTOR CO., U.S.A.
4	B	Ground	-	-	0
5	W (B)	Ground(1)	-	-	0(1)
		Unlock sensor signal (passenger side)	Input	Passenger side door lock is locked	5
				Passenger side door lock is unlocked	0
6	Y (LG)	Back door opener switch signal	Input	Back door opener switch is ON	0
				Other than above	5
7	OR	Half-latch switch signal	Input	Fully open → fully close	Courtesy of NISSAN MOTOR CO., U.S.A.
8	L	Close switch signal	Input	Fully open → fully close	Courtesy of NISSAN MOTOR CO., U.S.A.
9	P	Open switch signal	Input	Fully open → fully close	Courtesy of NISSAN MOTOR CO., U.S.A.
(1) *, ( ): Models with Intelligent Key