Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2006 >> QX56 AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS P0455 To P1217 >> DTC P0605 ECM >> DTC Confirmation Procedure >> Procedure For Malfunction B >> With CONSULT-II

With CONSULT-II

  1. Turn ignition switch ON and wait at least 1 second.
  2. Select " DATA MONITOR" mode with CONSULT-II.
  3. Turn ignition switch OFF, wait at least 10 seconds and then turn ON.
  4. If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
    Fig 1: Consult-II DATA MONITOR Display Screen
    G04080353Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About Mike's Workshop Manuals