Operation Procedure

Touch "DTC WORK SUPPORT" on "SELECT DIAG MODE" screen.

Fig 1: Consult-II SELECT DIAG MODE Display Screen
Courtesy of NISSAN MOTOR CO., U.S.A.
Touch select item menu.

Fig 2: Identifying CONSULT-II Select Work Item Display
Courtesy of NISSAN MOTOR CO., U.S.A.
Touch "START".

Fig 3: Identifying CONSULT-II TCC SOL Function Check Display
Courtesy of NISSAN MOTOR CO., U.S.A.
Perform driving test according to "DTC Confirmation Procedure" in "TROUBLE DIAGNOSIS FOR DTC".

Fig 4: Identifying CONSULT-II TCC SOL Function Check Display
Courtesy of NISSAN MOTOR CO., U.S.A.
- When testing conditions are satisfied, CONSULT-II screen changes from "OUT OF CONDITION" to "TESTING" .
  
  Fig 5: Identifying CONSULT-II TCC SOL Function Check Display
  Courtesy of NISSAN MOTOR CO., U.S.A.
  
  Fig 6: Identifying CONSULT-II TCC SOL Function Check Display
  Courtesy of NISSAN MOTOR CO., U.S.A.
Stop vehicle.
- If "NG" appears on the screen, malfunction may exit. Go to " DIAGNOSTIC PROCEDURE " .
  
  Fig 7: Identifying CONSULT-II TCC SOL Function Check Display
  Courtesy of NISSAN MOTOR CO., U.S.A.
Perform test drive to check gear shift feeling in accordance with instructions displayed.
Touch "YES" or "NO".
CONSULT-II procedure is ended.

Fig 8: Identifying CONSULT-II TCC SOL Function Check Display
Courtesy of NISSAN MOTOR CO., U.S.A.
- If "NG" appears on the screen, a malfunction may exit. Go to " DIAGNOSTIC PROCEDURE " .
  
  Fig 9: Identifying CONSULT-II TCC SOL Function Check Display
  Courtesy of NISSAN MOTOR CO., U.S.A.