Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2006 >> M45 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - VK45DE - M45 - DTC P1148 Through P2A03 >> DTC P1220 Fuel Pump Control Module (FPCM) >> DTC Confirmation Procedure >> With Consult-II

With Consult-II

  1. Turn ignition switch ON and select "DATA MONITOR" mode with CONSULT-II.
  2. Make sure that "COOLAN TEMP/S" indicates less than 70°C (158°F). If not, cool down the engine.
  3. Start engine.
  4. Hold vehicle at the following conditions for 12 seconds.
    DIAGNOSIS PROCEDURE

    ENG SPEED 1,375 - 3,475 rpm
    VHCL SPEED SE More than 70 km/h (43 MPH)
    B/FUEL SCHDL 1.5 - 23.0 msec
    Selector lever Suitable position
  5. If 1st trip DTC is detected, go to , "DIAGNOSTIC PROCEDURE ".
    Fig 1: Consult-II DATA MONITOR Display Screen
    G04074727Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About Mike's Workshop Manuals