With Consult-II

Turn ignition switch ON. (Do not start engine.)
Select "MAIN SIGNALS" in "DATA MONITOR" mode for "A/T" with CONSULT-II.
Touch "START".
Start engine and maintain the following conditions for at least 10 minutes (Total). (It is not necessary to maintain continuously.)

Fig 1: Consult-II SELECT SYSTEM Display Screen
Courtesy of NISSAN MOTOR CO., U.S.A.

VHCL/S SE.A/T: 10 km/h (6 MPH) or more

ACCELE POSI: More than 1/8

SLCT LVR POSI: "D" position
If DTC is detected, go to "DIAGNOSTIC PROCEDURE ".