Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2006 >> M35 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (Engine Control System - VK45DE - M45 - Introduction And DTC Index) >> Basic Service Procedure >> Fuel Pressure Check >> Fuel Pressure Release >> With CONSULT-II

With CONSULT-II

WARNING: This page is about a different car, the 2006 Infiniti M45. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch ON.
  2. Perform "FUEL PRESSURE RELEASE" in "WORK SUPPORT" mode with CONSULT-II.
  3. Start engine.
  4. After engine stalls, crank it two or three times to release all fuel pressure.
  5. Turn ignition switch OFF.
    Fig 1: CONSULT-II Display Screen - Fuel Pressure Release
    G04143187Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About Mike's Workshop Manuals