Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2006 >> M35 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Audio, Visual, Navigation & Telephone System) >> Navigation System >> Removal and Installation >> NAVI Control Unit >> Removal

NAVI Control Unit: Removal

WARNING: This page is about a different car, the 2006 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: To avoid damage, eject map DVD-ROM before removing the NAVI control unit.
  1. Disconnect negative battery cable.
  2. Remove front passenger seat. Refer to "REMOVAL AND INSTALLATION ".
  3. Remove NAVI control unit kick shield screws (A).
  4. Remove NAVI control unit kick shield (1).
  5. Disconnect NAVI control unit connectors.
  6. Remove NAVI control unit screws (B).
    Fig 1: Identifying NAVI Control Unit Screws (B)
    G04137106Courtesy of NISSAN MOTOR CO., U.S.A.
  7. Remove NAVI control unit (2).
scientia non olet · About Mike's Workshop Manuals