Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2006 >> M35 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Automatic Transmission) >> Shift Control System >> Control Device Removal and Installation >> Removal

Control Device Removal and Installation: Removal

WARNING: This page is about a different car, the 2006 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove negative battery terminal. Refer to "BATTERY ".
  2. Remove A/T finisher. Refer to "A/T FINISHER ".
  3. Disconnect selector control cable.
  4. Disconnect A/T device harness connector.
  5. Remove control device assembly.
scientia non olet · About Mike's Workshop Manuals