Check Trunk Lid Opener Cancel Switch
- CHECK TRUNK LID OPENER CANCEL SWITCH
With CONSULT-II
Check trunk lid opener cancel sensor ("TR CANCEL SW") in "DATA MONITOR" mode.
MONITOR ITEM CONDITIONSMonitor item Condition TR CANCEL SW Trunk lid opener cancel switch ON: ON Trunk lid opener cancel switch OFF: OFF Without CONSULT-II
- Turn ignition switch OFF.
- Check voltage between Intelligent Key unit connector and ground.VOLTAGE SPECIFICATIONS
Terminals Trunk lid opener cancel switch condition Voltage (V) (Approx.) (+) (-) Intelligent Key unit connector Terminal M32 23 Ground ON 0 OFF (Cancel) 5 Courtesy of NISSAN MOTOR CO., U.S.A.
OK or NG
OK: Trunk lid opener cancel switch is OK.
NG: GO TO 2.
- CHECK TRUNK LID OPENER CANCEL SWITCH CIRCUIT
- Disconnect Intelligent Key unit and trunk lid opener cancel switch connector.
- Check continuity between Intelligent Key unit connector and trunk lid opener cancel switch connector.CONTINUITY CONDITIONS
A B Continuity Intelligent Key unit connector Terminal Trunk lid opener cancel switch connector Terminal M32 23 M99 1 Yes - Check continuity between Intelligent Key unit connector and ground.CONTINUITY CONDITIONS
A Ground Continuity Intelligent Key unit connector Terminal M32 23 No
OK or NG
OK: GO TO 3.
NG: Repair or replace harness between Intelligent Key unit and trunk lid opener cancel switch.
- CHECK TRUNK LID OPENER CANCEL SWITCH OPERATION
Check trunk lid opener cancel switch.
CONTINUITY CONDITIONSTerminal Trunk lid opener cancel switch condition Continuity Trunk lid opener cancel switch 1 3 ON Yes OFF (Cancel) No OK or NG
OK: GO TO 4.
NG: Replace trunk lid opener cancel switch.
- CHECK TRUNK LID OPENER CANCEL SWITCH GROUND CIRCUIT
Check continuity between trunk lid opener cancel switch connector and ground.
CONTINUITY CONDITIONSTrunk lid opener cancel switch connector Terminal Ground Continuity M99 3 Yes Courtesy of NISSAN MOTOR CO., U.S.A.
OK or NG
OK: GO TO 5.
NG: Repair or replace trunk lid opener cancel switch ground circuit.
- CHECK INTELLIGENT KEY UNIT OUTPUT SIGNAL
- Connect Intelligent Key unit connector.
- Check voltage between Intelligent Key unit connector and ground.VOLTAGE SPECIFICATIONS
Terminals Voltage (V) (Approx.) (+) (-) Intelligent Key unit connector Terminal M32 23 Ground 5
Courtesy of NISSAN MOTOR CO., U.S.A.
OK or NG
OK: Check the condition of harness and connector.
NG: Replace Intelligent Key unit.