Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2006 >> FX35 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Engine Control System - Component Testing (VK45DE)) >> Ignition Signal >> Component Inspection >> Condenser

Component Inspection: Condenser

WARNING: This page is about a different car, the 2006 Infiniti FX45. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch OFF.
  2. Disconnect condenser harness connector.
  3. Check resistance between condenser terminals 1 and 2.

    Resistance: Above 1 MΩ [at 25°C (77°F)] 

    Fig 1: Identifying Resistance Between Connector Terminals
    G04075318Courtesy of NISSAN MOTOR CO., U.S.A.