DTC C1130-C1133, C1136

INSPECTION PROCEDURE

1. CHECK SELF-DIAGNOSTIC RESULTS 

   Check the self-diagnostic results.

   SELF-DIAGNOSTIC RESULTS CHART
   
   

   Self-diagnostic results
   ENGINE SIGNAL 1
   ENGINE SIGNAL 2
   ENGINE SIGNAL 3
   ENGINE SIGNAL 4
   ENGINE SIGNAL 6

   Is the above displayed in the self-diagnosis display items?

   YES : GO TO 2.

   NO : INSPECTION END

2. CHECK ENGINE SYSTEM 
   1. Perform an ECM self-diagnosis and repair or replace malfunctioning items. Perform ECM self-diagnosis again.
   2. Perform ABS actuator and electric unit (control unit) self-diagnosis again.

   OK or NG 

   OK : INSPECTION END

   NG : Repair or replace malfunctioning items. Perform the self-diagnosis again.