Rear Power Window Motor LH Circuit Check

1. Turn ignition switch ON.
2. Check voltage between rear power window switch LH connector D203 terminals 4, 5 and ground.
   Fig 1: Rear Power Window Motor LH Circuit Connector Terminal Voltage Specifications

   Courtesy of NISSAN MOTOR CO., U.S.A.

OK or NG

1. OK: Replace rear power window switch LH.
2. NG: GO TO 2.

Fig 2: Checking Voltage Between Rear Power Window Switch LH Connector D203 Terminals 4, 5 And Ground

Courtesy of NISSAN MOTOR CO., U.S.A.

1. Turn ignition switch OFF.
2. Disconnect rear power window switch LH and rear power window control unit LH.
3. Check continuity between rear power window switch LH connector D203 terminals 4, 5 and rear power window control unit LH connector D209 terminals 9, 10.
   1. 4 (W) - 9 (W): Continuity should exist. 
   2. 5 (W/R) - 10 (W/R): Continuity should exist. 

OK or NG

1. OK: GO TO 3.
2. NG: Repair or replace harness.

Fig 3: Checking Continuity Between Rear Power Window Switch LH Connector D203 Terminals 4, 5 And Rear Power Window Control Unit LH Connector D209 Terminals 9 And 10

Courtesy of NISSAN MOTOR CO., U.S.A.

1. Turn ignition switch OFF.
2. Disconnect rear power window control unit LH and rear power window motor LH.
3. Check continuity between rear power window control unit LH connector D209 terminals 11, 12 and rear power window motor LH connector D204 terminals 1, 2.
   1. 11 (O) - 2 (O): Continuity should exist. 
   2. 12 (BR) - 1 (BR): Continuity should exist. 

OK or NG

1. OK: Replace rear power window motor LH.
2. NG: Repair or replace harness.

Fig 4: Checking Continuity Between Rear Power Window Control Unit LH Connector D209 Terminals 11, 12 And Rear Power Window Motor LH Connector D204 Terminals 1 And 2

Courtesy of NISSAN MOTOR CO., U.S.A.