Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2005 >> G35 x >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (Brake Control System - Coupe) >> G-Sensor >> Removal and Installation >> Removal >> M/T Model

M/T Model

WARNING: This page is about a different variant/trim than selected.
  1. Remove center console. Refer to (Y) CENTER CONSOLE
  2. Disconnect harness connector.
  3. Remove installation bolts. Remove yaw rate/side G sensor.
    CAUTION:
    • Do not drop or strike yaw rate/side G sensor, because it has little endurance to impact.
    • Do not use power tool etc., because yaw rate/side G sensor is sensitive for the impact.
    Fig 1: Removing/Installing G-Sensor (M/T Model) - With Torque Specifications
    G02335723Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About Mike's Workshop Manuals