Diagnostic Procedure
WARNING: This page is about a different variant/trim than selected.
- CHECK FUEL GAUGE OPERATION
Refer to "SELF-DIAGNOSIS MODE OF COMBINATION METER ".
OK or NG
- OK: GO TO 2.
- NG: Follow the instruction of "SELF-DIAGNOSIS MODE OF COMBINATION METER ".
- CHECK FUEL LEVEL SENSOR AND CIRCUIT
Refer to "FUEL LEVEL SENSOR SIGNAL INSPECTION ".
OK or NG
- OK: GO TO 3.
- NG: Repair or replace malfunctioning parts.
- CHECK INTERMITTENT INCIDENT
Refer to "TROUBLE DIAGNOSIS FOR INTERMITTENT INCIDENT ".
- : INSPECTION END