Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2005 >> G35 Base, 2D Coupe, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 32 (Body Control Module - Sedan) >> BCM (Body Control Module) >> Removal and Installation of BCM >> Removal

Removal and Installation of BCM: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the dash side finisher. Refer to "BODY SIDE TRIM " .
  2. Disconnect BCM connector.
  3. Remove bracket mounting screws (3) to remove BCM and fuse block with bracket.
    Fig 1: Removing Bracket Mounting Screws
    G02355845Courtesy of NISSAN MOTOR CO., U.S.A.
  4. Raise the pawl of fuse block and remove bracket from fuse block to remove BCM.
    Fig 2: Raising Pawl Of Fuse Block And Removing Bracket From Fuse Block To Remove BCM
    G02355846Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About Mike's Workshop Manuals