Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2005 >> FX35 AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control System - VQ35DE >> DTC P0605: ECM >> DTC Confirmation Procedure >> Procedure For Malfunction C >> With Consult-II

With Consult-II

  1. Turn ignition switch ON and wait at least 1 second.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Turn ignition switch OFF, wait at least 10 seconds, and then turn ON.
  4. Repeat step 3 for 32 times.
  5. If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE  ".
    Fig 1: Data Monitor Scan Tool Display
    G02360678Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About Mike's Workshop Manuals