Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2004 >> Q45 >> Repair and Diagnosis >> External Pages >> Different car >> Section 223 (Driver Information System) >> Combination Meters >> Removal And Installation For Combination Meter

Removal And Installation For Combination Meter

WARNING: This page is about a different car, the 2002 Infiniti Q45. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the cluster lid A. Refer to INSTRUMENT PANELS .
  2. Remove the screws (4), and disconnect connectors.
    Fig 1: Removal & Installation (1 Of 3)
    G02031112Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Rotating the combination meter so that the left-side is in front, turn it until the meter face comes to the top.
    CAUTION: To prevent it from being damaged by interference with the meter bracket, protect the meter with waste rags.
    Fig 2: Removal & Installation (2 Of 3)
    G02031113Courtesy of NISSAN MOTOR CO., U.S.A.
  4. While pulling combination meter forward, pull it out to the right (combination meter back-side shall be in front).
    Fig 3: Removal & Installation (3 Of 3)
    G02031114Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About Mike's Workshop Manuals