1. Check Power Supply Circuit

1. Turn ignition switch OFF.
2. Disconnect trunk lid opener cancel switch connector.
3. Check voltage between trunk lid opener cancel switch connector M117 terminal 1 (G) and ground.
   1. 1 (G) - Ground : Battery voltage should exist  .

OK or NG 

1. OK: GO TO 2.
2. NG: Check the following.
   • Trunk lid opener relay
   • Harness for open or short between trunk lid opener cancel switch and trunk lid opener relay

Fig 1: Checking Power Supply Circuit

Courtesy of NISSAN MOTOR CO., U.S.A.