Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2004 >> I35 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle >> DTC Batt/Fluid Temp Sen (A/T Fluid Temp Sensor Circuit And ICM Power Source >> Diagnostic Procedure >> 5 Check TCM Power Source Step 2

5 Check TCM Power Source Step 2

  1. Turn ignition switch to OFF position.
  2. Check voltage between TCM harness connector F50 terminal 28 (Y/R) and ground.
    Fig 1: Checking TCM Power Source Step 2
    G00792499Courtesy of NISSAN MOTOR CO., U.S.A.
    1. Voltage:Battery voltage 

OK or NG 

OK: GO TO 7.

NG: GO TO 6.

scientia non olet · About Mike's Workshop Manuals