VDC/TCS/Abs Control Unit Circuit Check
WARNING: This page is about a different car, the 2003 Infiniti I35. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK CONNECTOR
- Turn ignition switch OFF.
- Check the terminals and connector of VDC/TCS/ABS control unit for damage, bend and loose connection. (control unit side and harness side)
- OK or NG
OK: GO TO 2.
NG: Repair terminal or connector.
- CHECK HARNESS FOR OPEN CIRCUIT
- Disconnect VDC/TCS/ABS control unit connector.
- Check resistance between VDC/TCS/ABS control unit harness connector B57 terminals 61 (L) and 63 (R).
- OK or NG
OK: Replace VDC/TCS/ABS control unit.
NG: Repair harness between VDC/TCS/ABS control unit and harness connector B58.