Consult-II Function: Notes
WARNING: This page is about a different variant/trim than selected.
The following functions are executed by combining data received and command transmitted via the communication line from the BCM.
BCM DIAGNOSIS CHART
| BCM diagnosis position | Inspection items and diagnosis mode | Description | |||||
|---|---|---|---|---|---|---|---|
| BCM C/U (1) | Self-diagnosis results | Carries out the self-diagnosis. | |||||
| Data monitor | CAN diagnosis support monitor | Displays CAN communication system diagnosis, disabled transmission status, and communication status of each unit communicated with BCM. | |||||
| Selection from menu | Displays the input data to BCM on real-time basis. | ||||||
| IPDM E/R (2) | Self-diagnosis results | Carries out the self-diagnosis. | |||||
| Data monitor | Displays the input data to IPDM E/R on real-time basis. | ||||||
| Active test | Gives a drive to a load to check the operation. | ||||||
| MULTI REMOTE ENT | Data monitor | Displays the input remote keyless entry system data to BCM on real-time basis. | |||||
| Active test | Gives a drive to a load to check the operation. | ||||||
| Work support | Changes the setting for each function. | ||||||
|
|||||||