Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2004 >> G35 x >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 115 (2004.5 - Body Control Module - Coupe) >> BCM (Body Control Module) >> Removal and Installation of BCM >> Removal

Removal and Installation of BCM: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the dash side finisher. Refer to BODY SIDE TRIM in "Exterior/Interior."
  2. Disconnect BCM connector.
  3. Remove bracket mounting screws (3) to remove BCM and fuse block with bracket.
    Fig 1: Removing BCM Mounting Screws And Fuse Block With Bracket
    G03699150Courtesy of NISSAN MOTOR CO., U.S.A.
  4. Raise the pawl of fuse block and remove bracket from fuse block to remove BCM.
    Fig 2: Removing BCM
    G03699151Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About Mike's Workshop Manuals