3. Check ASCD Brake Switch Circuit

WARNING: This page is about a different variant/trim than selected.

Turn ignition switch OFF.
Disconnect ASCD clutch switch harness connector. See Figure.
Turn ignition switch ON.
Check voltage between ASCD clutch switch terminal 1 and ground with CONSULT-II or tester.

Fig 1: Checking ASCD Brake Switch Circuit
Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 2: ASCD Brake Switch Circuit Test Parameters
Courtesy of NISSAN MOTOR CO., U.S.A.

OK or NG

OK: GO TO 8 .

NG: GO TO 4.