ASCD Brake Switch

Turn ignition switch OFF.
Disconnect ASCD brake switch harness connector.
Check harness continuity between ASCD brake switch terminals 1 and 2 under the following conditions.

Fig 1: ASCD Brake Switch Terminals Continuity Table
Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 2: Checking Harness Continuity Between ASCD Brake Switch Terminals 1 And 2
Courtesy of NISSAN MOTOR CO., U.S.A.

If NG, adjust ASCD brake switch installation, Refer to BRAKE PEDAL , and perform step 3 again.