Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2004 >> G35 x >> Repair and Diagnosis >> Engine Performance >> System >> 2004 - Engine Control System - Sedan >> Trouble Diagnosis >> DTC P1226: TP Sensor >> DTC Confirmation Procedure >> With Consult-II

With Consult-II

  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Turn ignition switch OFF and wait at least 10 seconds.
  4. Turn ignition switch ON.
  5. Repeat steps 3 and 4 for 32 times.
  6. If 1st trip DTC is detected, go to Diagnostic Procedure .
Fig 1: CONSULT-II Data Monitor Display
G00732738Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About Mike's Workshop Manuals