Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2004 >> G35 x >> Repair and Diagnosis >> Engine Performance >> System >> 2004 - Engine Control System - Sedan >> Trouble Diagnosis >> DTC P0102, P0103: MAF Sensor >> DTC Confirmation Procedure >> Procedure For DTC P0103

Procedure For DTC P0103

With CONSULT-II 

  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Wait at least 5 seconds.
  4. If DTC is detected, go to Diagnostic Procedure . If DTC is not detected, go to next step.
  5. Start engine and wait at least 5 seconds.
  6. If DTC is detected, go to Diagnostic Procedure .
scientia non olet · About Mike's Workshop Manuals