Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2004 >> G35 Base, 2D Coupe, Standard >> Repair and Diagnosis >> Engine Performance >> System >> 2004 - Engine Control System - Coupe >> DTC P1572: ASCD Brake Switch >> Component Inspection >> Stop Lamp Switch

Stop Lamp Switch

  1. Turn ignition switch OFF.
  2. Disconnect stop lamp switch harness connector.
  3. Check harness continuity between stop lamp switch terminals 3 and 4 under the following conditions.
    Fig 1: Stop Lamp Switch Component Inspection
    G00724308Courtesy of NISSAN MOTOR CO., U.S.A.
    Fig 2: Stop Lamp Switch Component Inspection Specifications
    G00724307Courtesy of NISSAN MOTOR CO., U.S.A.

    If NG, adjust stop lamp switch installation, refer to BRAKE PEDAL , and perform step 3 again.

scientia non olet · About Mike's Workshop Manuals