Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2004 >> G35 Base, 2D Coupe, Standard >> Repair and Diagnosis >> Engine Performance >> System >> 2004 - Engine Control System - Coupe >> DTC P0102, P0103: MAF Sensor >> Diagnostic Trouble Code (DTC) Confirmation Procedure >> Procedure For DTC P0102

Procedure For DTC P0102

With CONSULT-II 

  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II. See Figure.
  3. Start engine and wait at least 5 seconds.
  4. If DTC is detected, go to "Diagnostic Procedure ".

With GST 

Follow the procedure "With CONSULT-II" above.

scientia non olet · About Mike's Workshop Manuals