ECM Inspection Table

WARNING: This page is about a different car, the 2004 Infiniti FX45. However, it is still accessible from the selected car via links, so may be relevant.

Specification data are reference values and are measured between each terminal and ground. Pulse signal is measured by CONSULT-II.

CAUTION: Do not use ECM ground terminals when measuring input/output voltage. Doing so may result in damage to the ECMs transistor. Use a ground other than ECM terminals, such as the ground.

Fig 1: ECM Terminal Specifications (1 Of 10)

G00344516

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 2: ECM Terminal Specifications (2 Of 10)

G00344517

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 3: ECM Terminal Specifications (3 Of 10)

G00344518

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 4: ECM Terminal Specifications (4 Of 10)

G00344519

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 5: ECM Terminal Specifications (5 Of 10)

G00344520

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 6: ECM Terminal Specifications (6 Of 10)

G00344521

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 7: ECM Terminal Specifications (7 Of 10)

G00344522

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 8: ECM Terminal Specifications (8 Of 10)

G00344523

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 9: ECM Terminal Specifications (9 Of 10)

G00344524

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 10: ECM Terminal Specifications (10 Of 10)

G00344525

Courtesy of NISSAN MOTOR CO., U.S.A.