Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2004 >> FX35 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 259 (Engine Control System) >> DTC P1720 Vehicle Speed Sensor (A/T Output) >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2004 Infiniti FX45. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Always drive vehicle at a safe speed.
NOTE: If DTC confirmation procedure has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

With CONSULT-II 

  1. Turn ignition switch ON.
  2. Select DATA MONITOR mode with CONSULT-II.
  3. Start engine.
  4. Drive vehicle at a speed of 20 km/h (12 MPH) or more for at least 5 seconds without brake pedal depressing.
  5. If 1st trip DTC is detected, go to DIAGNOSTIC PROCEDURE  .

With GST 

Follow the procedure With CONSULT-II above.

scientia non olet · About Mike's Workshop Manuals