Procedure For Malfunction A

WARNING: This page is about a different car, the 2004 Infiniti Q45. However, it is still accessible from the selected car via links, so may be relevant.

With CONSULT-II

Turn ignition switch ON.
Select "DATA MONITOR" mode with CONSULT-II.
Maintain the following conditions for at least 10 consecutive seconds.

Fig 1: Maintaining Conditions (1 Of 2)
Courtesy of NISSAN MOTOR CO., U.S.A.
Maintain the following conditions for at least 20 consecutive seconds.

Fig 2: Maintaining Conditions (2 Of 2)
Courtesy of NISSAN MOTOR CO., U.S.A.
If the 1st trip DTC is detected, go to Diagnostic Procedure .

With GST

Follow the procedure With CONSULT-II above.