Diagnostic Trouble Code (DTC) Confirmation Procedure

CAUTION: Always drive vehicle at a safe speed.

NOTE: If "DTC Confirmation Procedure" has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

After the repair, perform the following procedure to confirm the malfunction is eliminated.

Fig 1: Identifying TCM Terminals And Reference Values (1 Of 2)

Courtesy of NISSAN MOTOR CO., U.S.A.

With CONSULT-II

Turn ignition switch ON.
Select "DATA MONITOR" mode for "ENGINE" with CONSULT-II.
Start engine and maintain the following conditions for at least 5 consecutive seconds.
VHCL SPEED SE: 10 km/h (6 MPH) or more

THRTL POS SEN: More than 1.3V

Selector lever: 3rd or D position

With GST

Follow the procedure "With CONSULT-II".

Fig 2: Identifying TCM Terminals And Reference Values (2 Of 2)

Courtesy of NISSAN MOTOR CO., U.S.A.